ARCHITECTURAL BENEFITS

  • Modern transparent architecture with only 55 mm face width
  • Suited for glass roofs with 00pitch
  • Vertical and polygonal curtain walls up to 30°
  • Passive building requirements
  • Can also be configured as heated curtain walls
  • 3-level sealing system

SPECIAL TECHNICAL FEATURES

  • Integration into steel and wooden substructures rp tec 55-1
  • Easy to process due to modular system structure
  • Proven connection types for cost-effective production: Nail fastening system, set stud technology, screw connection
  • Bullet Resistant FB4 is optional

 

TESTED – CERTIFIED FEATURES

  • Resistance under wind load: +2000/-3200 Pa; Safety +3000/-4800 Pa (rp tec 60-1); 1375 Pa / Security ±2062 Pa (facade) ±2000 Pa / Security ±3000 Pa (for 3° glass roof) (rp tec 60)
  • Air permeability: AE (rp tec 60/60-1)
  • Watertightness: RE 1800, RE 2400 (0° roof) (rp tec 60-1); RE 1200 (rp tec 60)
  • Impact strength: E5-I5 (rp tec 60/60-1)
  • Burglar resistance: RC 3
  • Thermal transmittance: Ucw ≥ 0,59 W/m²K (rp tec 60-1); Ucw ≥ 1,7 W/m²K (rp tec 60)
  • Sound insulation: ≤ 47 dB (rp tec 60-1); ≤ 45 dB (vertical glazing) (rp tec 60)
1
2
3
4
5
1

Carrier: Steel / Wood

2

Direct detection / Source

3

Pressure Profile

4

Cover Profile

5

Gasket

DESIGN BASED FUNCTIONALITY
The superior properties and advantages of steel stand out in the construction sector. Designing large-span buildings with thin profile sections in architecture is only possible with steel. Along with these, steel is a material that contributes to environmental sustainability by being recyclable. Stability and safety are among the main priorities of the R&D team in the design of RP Technik profile systems. The safety of the profile system has been tested and certified.

RP Technik also provides services to meet the special demands of customers with its support-oriented system experts. Standard systems in the RP Technik provide economic advantages in terms of production technique and processing. The wall thicknesses of the profiles vary between 1.5 - 1.8 mm and offer high stability.

WHY PENTEK

Pentek is the sole representative of German steel profile system manufacturer RP Technik in Turkey. We produce fire-rated glass doors in E/EW/EI certified in providing resistance 30/60/90/120 minutes, steel structural (door / fixed division), theft and bullet-resistant systems and glazed steel facades.

Take advantage from Pentek’s experience in the entire project process, from technical specification to planning, from production to assembly.

This post is also available in: Turkish